CANADA'S STORE

Credit Offered* Learn More

Collect 30x Total CT Money®* on almost everything, Friday, June 14. Triangle Credit Card Exclusive. *Conditions apply. 

Learn More

OBTENEZ AU TOTAL 30X L’ARGENT CTMD* sur presque tout le vendredi 14 juin. Exclusivité de carte de crédit Triangle. *Des conditions s’appliquent. 

En savoir plus

Buy One Get One Free on Selective Products Only        

Know More

Test

CountDown Banner

How to repair cracks in your driveway

Cold Canadian winters and humid summers can be tough on asphalt- it's time to repair any cracks that the seasons may have left behind.

ct-howto-2016-Tools--RepairCracksinYourDriveway-1280x522-topbanner ct-howto-2016-Tools--RepairCracksinYourDriveway-1280x522-topbanner

STEP 1

Check the weather - aim for a dry day over 5 degrees.

Double check the label as application temperatures may vary.

STEP 2

Use a broom or wire brush to to clean all the dirt out of the cracks.

STEP 3

Grab a can of Asphalt Driveway Crack Filler.

Read all the warning labels.

STEP 4

Place your finger on the cap and shake well.

Approximately 2 minutes.

STEP 5

Cut the spout tip to the desired width.

Ensure the spout width is smaller than the crack.

STEP 6

Squeeze the Asphalt Driveway Crack Filler into the cracks.

If the crack is 1/4 inch or less in width/depth, only one application is necessary.

STEP 7

If the crack is deeper than ¼ inch, squeeze a first application of asphalt driveway crack filler.

Then, add fine sand to a 1/4 inch from the surface - then add another layer of crack filler to top it off.

STEP 8

Add another layer of crack filler to top it off.

STEP 9

Use a generous helping of the crack filler, overfilling each crack to allow the filler to sink in.

STEP 10

Let the crack filler sit for at least a day before you walk or drive on the repaired areas.